Who said that nails can only be pulled out of planks using a nail clipper or pliers? Progress does not stand still, and some Kulibina masters offer ideas on how to facilitate the work.
In this review, we will talk about a homemade nozzle for a screwdriver, with which you can also pull out nails.
Of the basic materials for making homemade products you will need: a piece of a round metal pipe, a piece of angle, an elongated nut and a stud.
First of all, the master cuts off a piece of steel pipe of the desired length. Then, using a grinder, she cuts a groove in it. The edges must be treated with a grinding nozzle.
The main stages of work
A washer must be welded to the end of the pipe. Then the author drills a hole for a hairpin in it with a drill of suitable diameter.
Further from the corner you need to cut off a piece of grinder with a couple of pointed teeth. The author welds an elongated nut to this blank. Then the resulting part will need to be cleaned with a grinding disc.
The next step is the assembly of the device. On the hairpin you need to wind a two-prong, which will rip the nails. Then the pin is inserted into the pipe, and fixed with two nuts.
A more detailed process of manufacturing a nail head for a screwdriver is recommended to watch in the video on our website.
