Now there are a lot of varieties and shapes of rings and everyone can find something of their own, but if you want something original that emphasizes your style and gives you the opportunity to prove yourself as a beginner jeweler - this article is for you.
And so we need:
Any piece of steel (copper or brass) pipe, in general, which you can get, the inner diameter of the pipe should correspond to the diameter of your finger on which you will make the ring.
Next, we need to cut the prepared pipe section at an angle, the larger the angle, the wider the front of the ring and, accordingly, the back.
After you have decided on the corners - we will file the future workpiece, do not be discouraged if it does not look attractive yet. All Ahead!
Next, we determine the front (wide) side of the ring. If you want to make a rectangular one like mine, then we clamp the workpiece perpendicularly into a vice, and grind it with a file to the desired state.
Then we grind all sharp corners and ledges from the sides.
After you have given the ring the desired shape, we will take up the drawing - here the choice is unlimited, it all depends on your imagination and the availability of the necessary tools, if you get along well with metal etching, you can get a very nice and interesting picture, I settled on the classic and made a couple of cuts on the sides and 3 diagonally, then the tedious grinding process begins, if you have a power tool for polishing this will greatly facilitate the polishing process, in the absence of the necessary tool, we take a large emery cloth and align ivaem rough bumps, then take the very small nazhdachku, which will be able to find and start a circular motion to polish the ring that would remove all the scratches.
And finally, if you want to make your ring shiny, you need to rub it with goy paste, using a rag.
With this method, if you have desire and imagination, you can create unique author's products, everything is in your hands, successful home-made products.