In this review, the author shows how you can make a simple device for hammering nails with your own hands. It is useful both at home and in the country.
With it, you can hammer nails at an angle, including in hard-to-reach places. This is very convenient, since you do not need to use ladders or scaffolds.
For the manufacture of this homemade product, a profile pipe 20x20 mm 60 cm long will be required. Also, a 15x15 mm profile 70 cm long will need to be prepared
First of all, cut the profile 20x20 mm at an angle (on one side). Then, with the help of a grinder, we make teeth that will abut against a wooden surface.
The main stages of work
At the end of the profile pipe 15x15 mm, the author inserts a bolt, and then scalds it. Then the place of welding and the bolt itself must be sanded with a petal circle - as a result, a hammer is obtained that will hit the nail.
To the other end of the profile pipe 15x15 mm, the author welds a bolt with a nut. This place will have to hit with a hammer.
Grind the weld with a grinder. Then we insert the profile pipe 15x15 mm into the profile 20x20 mm, and the homemade product is ready.
For details on how to make the device for hammering nails at an angle, see the video on our website.
