If you often relax in nature or go fishing with friends, but you don’t want to make a bonfire, this interesting homemade product will definitely come in handy in the country. Moreover, such a simple device does not take up much space in the trunk of a car and you can make it yourself with your own hands from available materials at hand.
Manufacturing process
For this device you need a piece of seamless metal pipe with a diameter of 110 mm and a length of 350 mm. In the lower part of the pipe (which will be installed directly on the ground), it is necessary to cut the teeth with a height of about 40-50 mm using a grinder. By the way, you can do otherwise - just weld 3-4 steel bars to the pipe. After the teeth are cut, it is advisable to grind the metal surface for greater aesthetics.
On the opposite side of the pipe, six holes must be drilled around the entire circumference at an equal distance from each other with a diameter of 8-10 mm. After this, it is necessary to drill another hole (approximately at a distance of 20-30 cm from the edge) with a diameter of 20 mm. In the center of the pipe, a prefabricated steel fork will also need to be welded perpendicularly. That's all - the design is fully assembled.
Use as directed
Using this home-made device, you can quickly warm up or cook food using a compact gas burner in a spray can with a piezo ignition as a fire source. This device is useful to absolutely all lovers of outdoor recreation.
