If you are seriously engaged in carpentry or just make various wood products, then, of course, you know that working with a blunt tool is not only not convenient, but also unsafe.
The quality of processing of wooden blanks directly depends on the correct sharpening angle of the cutting edge of the blade of a chisel or other tool. For quick and convenient sharpening of chisels, the master proposes to make a simple tool-trolley.
To make such a home-made sharpener will require a minimum of time. Also, homemade does not require the use of any complex and expensive tools. Therefore, everyone can make this device.
The main stages of work
To make a trolley for sharpening chisels, you need a piece of a corner and a plate about 8-10 cm long. Holes must be drilled along the edges of the plate and in one of the shelves of the corner. Then in the second shelf you will need to cut two pieces.
Next, you need a long stud and two nuts that are screwed onto it. A narrow part of the corner must be welded to the "body" of the stud just between the two nuts. Welds will need to be cleaned with a grinder.
The metal plate is attached to the corner using two bolts with nuts. Then, on both sides of the stud, you need to put on the bearings and fix them with nuts. The homemade product is ready, and you can already use it for work.
Details on how to make a device for quick and convenient sharpening of chisels can be found in the video on the website.
