Flowers adorn the garden throughout the warm season. Flowerbeds and flower beds create cosiness and a special atmosphere on the homestead.
But you can plant pansies or petunias not only on the ground. The cache-pot can be placed on a fence or wall.
In this review, the author shares the idea of how to make a beautiful stand for pots with your own hands.
Stages of creation
First of all, you will need to make a patterned stencil. Transfer the drawing to the board. Now mark the part on which the pot is located, it should be the widest.
Leave one edge straight, it will lie against the wall, and the second you can make it rounded or add a pattern too. The last element is the back of the stand. Its bottom will be successfully decorated with a simple carving.
Now you need to cut out all the parts. Creating a pattern, it is worth thinking in advance about how you will cut it.
After all, if you have only a jigsaw at your disposal, then too thin bent elements can cause difficulties.
Side carved elements will be interconnected. At this point, cut the board at an angle of 30 degrees. Depending on the size of the stand, the angle may vary, first cast the elements to each other, checking how they will look.
Now you need to sand the wood. Carefully process all surfaces, especially paying attention to the cut points. No splinter should remain on the product.
The junction of the side elements will be fastened with self-tapping screws and additionally treated with glue. Connect the parts and drill holes. In addition, it is better to make recesses for the screws.
Now you can fasten all the parts together. At the junction of the side elements with the back, cut some wood so that the parts fit flat.
So it will be easier to connect them, and the design will become more solid. It remains only to cover the stand with paint or stain and put on it a pot of flowers.
Several of these coasters with pots will add greens and bright colors. And to create them is quite simple.
