Useful and interesting

The owl print today is one of the most relevant and sought after among young people. The image of this feathered beauty can be found on a variety of objects: clothes, bags, hair ornaments, jewelry, dishes. In the world of needlework, craftsmen are increasingly using the image of an owl in the creation of their products.

Sometimes, for various reasons, you have to use a plastic bottle to replenish drinking water supplies. But at the most inopportune moment, the handle at the bottle breaks off. I want to offer two ways to make a homemade pen. For the first method, we need two pieces of clothesline, a piece of polypropylene (PP) pipe with a diameter of 20 mm and a length of 10-12 cm, as well as a little nylon thread.

Very often, the headphone breaks off the wire near the plug. Let's try to repair this malfunction on our own. To do this, we need glue, an ordinary spool of thread, a piece of heat shrink tube and electrical tape. It is advisable to use glue, which is intended for bonding fabric. But I only had the Monolith on hand.

There are situations when it is necessary to solder aluminum products. But due to the fact that the oxide film covers the surface of aluminum, the solder simply does not stick to it. Currently developed solders and fluxes specifically designed for this purpose. But we will try, cope with this task in the old grandfather way.

With prolonged and intensive operation, the remote control of the radio equipment begins to manifest a characteristic malfunction. The buttons on the remote control stop responding to pressing. This happens due to contamination of the contact pads of the board and rubber buttons, or due to wear of the conductive coating of the buttons. To restore the remote control, you can carefully disassemble the remote, clean the pads and buttons with a damp cloth, and apply a little conductive glue to the buttons.

Crocheting a basket is pretty simple. Even a child can handle this. But if you knit from ordinary threads, then the basket will turn out to be excessively soft, and will not keep its shape. Have to starch, then dry. You can avoid unnecessary hassle if, instead of yarn, you use ribbons cut from plastic bags.

In this article, I will tell you how to prolong the life of a lighter that does not have a gas valve. To do this, we need an empty disposable piezo lighter, a gas canister with a set of adapters, two matches and tweezers. We start by disassembling the lighter, remembering the location of the parts.

To make a cover, we need a little fur velor from an old sheepskin coat, a thin synthetic winterizer and Velcro, as well as any sewing machine, scissors, ruler, marker, scotch tape, Moment glue and glue stick. The pattern was designed by FrontDesigner 3.0. To do this, measured the length, width and height of the camera and added 0.5 cm on each side for the seam.

Today we will perform a very simple and incredibly useful exercise in flower science. All professional artists more than once went through this, and, I think, no one regretted it. In an art school, such an exercise is performed in the first year of study in the first quarter of the school year, in art studios hours of classes devoted to this topic are one of the most beloved.

Cover for your favorite book or school textbook. Each of us has our favorite books. We often read them ourselves, give it to our relatives, acquaintances and acquaintances to read ... Therefore, often the most interesting books look shabby. To save your favorite books, you can sew nice covers with beautiful bookmarks for them, because bookmarks also help to keep the pages neat.

Practical and very simple machine tool based on an electric drill. It is intended for processing wood and plastics: it allows cutting bars, boards, plywood, plexiglass and textolite, sawing slats and curly planks, milling grooves, grinding wood products, polishing surfaces, drilling holes, sharpening drills, chisels and other cutting tools.

Nowadays, buying a new handbag is very simple. A huge selection from expensive leather to inexpensive textile. But there are situations when it is very a pity to abandon your favorite bag just because its handles have deteriorated, and in the repair workshop it is advised to throw it away. Then you should arm yourself with tools and patience.

Materials: willow branches (willow, vine), paper plaster, breadboard knife, woolen threads, decorative beads, thread, needle. The catcher consists of a rim and a net. Any round base is suitable for a rim: made of wire, hoop. However, a more natural base of flexible branches. Willow, willow, shoots of wild grapes or hops are suitable.

Today, in the salons of mobile communication there is a huge assortment of covers for cell phones, which will satisfy any needs and tastes. However, it is often necessary to purchase a case for a specific phone model, it turns out that the choice is limited to several standard options. It is very easy to find a silicone case or handbag for a touch phone, but original options are not so easy to find.

Women are very fond of receiving flowers as a gift. But not all men love to give them. Our defenders are often guided by considerations that it is better to give something practical. In this case, the best option is soapy flowers. Yes, yes, soapy. Soap flowers. Unusual, original, festive. I offer a small master class on how to make a rose with your own hands.

1. Rinse the pineapple under running water and wipe with a paper towel. Then take the sharpest knife (best ceramic) and cut off the base of the fruit, and then the top with leaves. After that, you should get something like a cylinder. 2. Place the pineapple vertically on a chopping board and peel off each side, making slices at least 1 cm thick.

Are you thinking of doing home soap making but don’t know where to start? First you need to prepare all the necessary raw materials and equipment. To do this, we buy from the list below all that is needed for the manufacture of handmade soap. 1. Soap base (hereinafter referred to as MO). It is transparent, white and colored.

Necessary materials and tools: - a box (you can use a box for shoes or small household appliances) - a frame for the future organizer. In order for the organizer to be strong, it is better to use a box of thick thick cardboard. - cardboard; - a piece of fabric for decoration; - scissors; - Ruler and pencil; - threads (for internal seams and finishing of external sections) and needles; - PVA glue.

It turns out that making a stylish leather case for the player yourself is not so difficult. We need: 1. A little skin, the thicker the better 2. Thick cardboard or plywood 4. Awl 5. A dull metal object 6. Water 7. A sharp knife. Step 1 First, we need to cut out a material that is identical in size to our iPod.

Good day to all, in this short article I will tell you how to make a spray can with my own hands. To do this, we need: Absolutely any spray can from the deodorant, the main thing is that it would be empty perfectly fit without suture, it better holds a lot of pressure. Paint, I used ink for fountain pens.