Auto

Many car owners are faced with such a problem as the creak of the door stop. Someone just lubricates WD-40 or solid oil, believing that this will help. However, after lubrication with solid oil, the problem does not disappear, but only worsens. Doors of a car cease to be fixed in the middle and extreme positions. In addition, after processing the limiter with a solid, the door ceases to hold the wind load.

In this review, the author shows how to make do-it-yourself lugs for a walk-behind tractor. They will be mounted directly on the tires. Perhaps someone will like this option. To implement this idea, a metal strip of 20x40 mm and 30x40 mm is required. From the latter, the author will also make lugs.

In this review, the author tells in detail how you can do tinting the side window of a car with your own hands without removing it. Moreover, this can be done without even having experience in carrying out such work. First of all, it will be necessary to wipe the glass well on both sides: first from the outside, then from the inside.

To protect the wheels of the car from theft, very often car owners set "secrets". What it is? This is a secret fastener - bolts or nuts that have a unique head shape. A feature of such secret fasteners is that the "freelance" bolts and nuts can only be unscrewed with the special key that comes with the "secrets".

In this review, the author proposes to install a small home-made staircase in a mini van or minibus. Using it is much easier to reach for things on the trunk than from the threshold of a car. To make such a device is very simple. It will take two pieces of a metal plate and a door hinge.

On the "black dots" on the windshield located behind the rear-view mirror, the suction cups for fixing the DVRs and other automotive equipment do not seem to be able to properly fix. A little shake is enough, and the suction cup falls off along with the equipment, which causes some inconvenience, and can even lead to damage to the registrar, which, of course, is undesirable.

In this review, the author shows a simple way, how to make a mobile foam generator at home. This is a very necessary and useful thing for car owners. To make homemade products you will need a manual sprayer, which is usually used in the country to spray plants and horticultural crops.

If abrasions and bald patches appear on the leather sheath of the steering wheel of a car, this can all be very easily fixed. And for this, you do not need a spray gun and a spray gun. It should be noted that the technology itself to restore the appearance of the leather steering wheel braid is not only easy to implement, but also affordable.

Owners of "experienced" cars that are more than 8-10 years old are faced with such a problem as burnt or faded plastic in the cabin. The appearance of dull plastic makes the interior in the interior dull and faded. However, this is very easy to fix. In this review, the author will share a simple but very useful “recipe” that will be useful to many car owners.

It would seem that it can be difficult to replace brake pads? Many car owners do this on their own without contacting a service center. However, it should be noted that some points are not even known to many car service workers. For example, did you know that there are wear indicators on the brake pads and are installed on only two pads?

Very often, not only vehicles, but also trailers for them fall into the field of view of hijackers. Therefore, an anti-theft lock for a car trailer never hurts. You can make it yourself from a square pipe. In addition to the profile, you will also need a lock and a loop, which would fit in size to the profile pipe.

From the profile pipe, you can make a durable and relatively light trunk for the car. And in this review, the author shows the process of making a homemade trunk on the Niva. The size of the trunk is 1600x1350 mm. Accordingly, for other cars, the dimensions will be different. As for the profile pipe, in this case the master uses a rectangular (20x30 mm) and square profile (10x10 mm).

Automotive plastic headlights may turn yellow or cloud over time (burn out). In addition to the fact that such headlights have an unpresentable appearance, they are also not able to provide the desired level of lighting in the dark. In this review, the author shares a simple, but effective way, how to independently restore the burned out plastic headlights on a car in just 5-10 minutes.

To quickly and reliably fix a barrel or other loads in a car trailer, you can use a homemade device. To make it, you will need a gear and pieces of metal. First of all, you need to cut three pieces of metal strip: two segments 8 cm long and one shorter segment - 5 cm long.

Too lazy to lift the car by hand? In this review, the author shows how you can make the completion of a screw rhombic jack for a car. To do this, you need an electric motor from the wipers. First of all, we cut off a small piece of a steel plate and drill three holes in it for mounting the engine.

In this review, the author suggests converting a conventional manual hydraulic bottle-type jack into an automatic one. To do this, you will need a working engine from auto wipers and metal trimmers. First, cut a small piece of steel pipe, after which it needs to be cut in half. On one side of the workpiece must be connected using a furniture hinge.

Using a homemade vacuum pump, you can easily change the oil in the car. The device itself is very simple to manufacture. You will need a vacuum cleaner, a glass jar, pieces of PVC tubes and some other materials. To make a home-made vacuum pump, you will also need a plastic corner for a pipe with a diameter of 15 mm.

Are there any chips or cracks on the car glass? This can be easily fixed using a special repair kit, which can be ordered on Aliexpress or another website on the Internet. The kit itself includes: a plastic injector for glass repair, a blade, films and a special polymer, which is used as a filler.

In this review, the author suggests making a do-it-yourself simple support stand for a car from a profile pipe. With its help, you can easily change the wheel or repair the suspension. For the manufacture of this device, the following materials will be needed: a piece of sheet metal with a thickness of 6 mm, a profile of 30 * 30 mm and a profile of 25 * 25 mm, as well as an angle of 32 * 32 mm and a pair of M12 bolts.

Many car owners sometimes encounter such an unpleasant problem when a car starts very hard in the morning. In other words, the battery simply sits down during the night, while on the eve of the whole day there are no problems with it. In this case, it is necessary to check the car for current leakage, and this can be done independently, having a multimeter and a wire with crocodiles.