The handbrake is a handbrake, and the emphasis (shoe) under the wheel will never be superfluous. In stores today you can easily buy inexpensive plastic shoes for 150-300 rubles. But why even spend money on them when a reliable emphasis on the wheel of a car can be made with your own hands from improvised materials?
Moreover, a home-made emphasis with metal spikes will last much longer than Chinese plastic, and more reliable (especially in the winter, when there is ice on the roads). In general, if you are interested in how to do the emphasis with spikes on the wheels of a car with your own hands, then read on.
First of all, cut two pieces of 8 cm long from a steel round bar. On both sides of these rods it will be necessary to cut the thread. Then we cut two pieces of tube 40 mm long, as well as four pieces 2 cm long.
The main stages of work
We cut off a piece of the plate with a thickness of 5 mm with dimensions of the sides 80x240 mm. Then we retreat from the edge of about 10 mm and bend at a right angle. From previously cut blanks, we collect the loops, and weld one of them to the plate.
Then another piece of the plate with dimensions of 135x80 mm is then welded to this loop, and another piece of it with dimensions of 90x80 mm and a thickness of 5 mm is welded to it. Two nuts must be welded to the bent side of the main plate, into which then a wire handle must be inserted. In the plate itself, we drill eight holes for the spikes.
The detailed process of making a makeshift stop with spikes for the front or rear wheel of the car can be seen in the video on the website.
