A simple tool for accurately chamfering tiles

Pin
Send
Share
Send

For quick and most importantly - accurate chamfering from porcelain tiles you can use a simple fixture, which is easy to make yourself using improvised materials.

Chamfering is necessary to assemble the outer corner. In general, everyone in the subject will understand. The advantage of this design is that instead of the expensive "wet cutter" for cutting tiles, you can use a small grinder at an angle.

First of all, it is necessary to cut off the ring from the steel pipe and process it on a belt grinding machine. Then in the ring you will need to make a small slot, and then weld an elongated nut along the edges.

Next, the master cuts the nut into two parts. The ring is put on the gear housing of the grinder, and a bolt of a suitable diameter is screwed into the nuts. Thus, a homemade clamp was obtained.

The main stages of work

At the next stage, it will be necessary to cut the part from the channel. The edges of the channel shelves need to be rounded, and in the middle, cut a groove in the form of a semicircle with a grinder. The part itself must be processed on a grinding machine.

The master drills through holes in the side walls of the channel and cuts the thread. Bolts are screwed into the holes, the head of which is under the hexagon.

Then, from the piece of the channel, the master cuts out two more parts - they must be the same. After that, all the elements are collected in a heap. The assembled part is welded to the clamp on the angle grinder.

We recommend that you watch the video on the site, which shows the step-by-step process of manufacturing and assembling a simple tool for accurately chamfering the tile. Write in the comments what you think about this homemade product.

Pin
Send
Share
Send

Watch the video: How to make a simple Jig to cut 45 degree tile edges (March 2024).