Share
Pin
Tweet
Send
Share
Send
Required Materials
To diagnose the exhaust manifold, you will need:
- home vacuum cleaner;
- piece of rubber hose;
- funnel for liquid;
- Scotch.
Leak search
It is necessary that the collector cools down, otherwise it is not safe to work. Having removed the nozzle from the vacuum cleaner, its hose should be connected to the exhaust pipe. It is unlikely that the diameters will coincide, so adhesive tape is useful here. It is advisable to remove air filters and a bag from the vacuum cleaner, if it is not of a container type, so that it does not absorb the smells of oil, fuel and burning from the exhaust system.
From a piece of rubber hose and funnel you need to build an impromptu stethoscope. If the diameter of the small hole of the funnel is less than the inner section of the hose, then everything can be compensated with tape.
Turning on the vacuum cleaner, you need to go to the muffled cooled engine and applying a stethoscope to the collector to listen to where the air is drawn in. It is necessary to rearrange the end of the hose smoothly without gaps.
After detecting a possible hole, you need to close it with your finger, if the noise stops, then the smoke just goes out through it. Most likely there will be more than one hole. In order not to lose finds, they should be marked with chalk.
After detecting all the holes, the collector can be removed and brewed, sealed or coated with sealant, in general, as you like. Of course, they haven’t come up with anything more reliable than welding.
This method is very good, but even better if the vacuum cleaner has a blow function. When operating in this mode, it will not suck in bad air from the exhaust system, so there is no need to remove the filters. When blowing out of the openings on the manifold, air will come out, not be sucked in.
Using a vacuum cleaner, you can look for holes in the muffler and in the exhaust system as a whole. In this case, you do not need to burn your hands and rush, therefore, upon completion of the diagnosis, it is quite possible to find all the holes at one time and carry out a complete repair.
Original article in English
Share
Pin
Tweet
Send
Share
Send